Schlagwort-Archive: indoor tennis court interlocking mat

Explain why kindergarten floor materials use floating assembly floor

Polypropylene (PP), the main raw material used in kindergarten suspension-assembled flooring, is a high-strength and high-performance environmentally friendly material. It is added with anti-ultraviolet radiation, anti-oxidation and anti-cold additives during production to make the product with pressure, impact and high resistance. Low temperature, long use time and so on. 100% non-asbestos, no harmful fillers such as lead and mercury, and no radiation. It is a green floor decoration and renovation material that will not cause harm to the human body. SC-ZSfloor concludes that the application of suspended assembled flooring as a ground material for kindergarten has the following six major advantages:
1, sports protection: can provide excellent motion buffer protection, which can minimize sports injuries. When taking off, it can absorb a large amount of impact, fully protect the body functions such as ankle joints and knee joints, and feel warm in the foot. The elastic interlocking multi-use basketball court in kindergarten can absorb the shock and relieve the tiredness of the knee and provide a warm foot feeling.

2, sound absorption and noise prevention: kindergarten suspended floor has a sound absorption effect compared to ordinary ground materials, its sound absorption can reach 20 decibels.

3, construction is fast: kindergarten assembly floor paving construction is convenient and fast, and maintenance is simple. During the installation, the floor joints are connected by male buckles. In order to make the adjacent two floor blocks tightly fit behind the device, the rubber seam can be used to knock the floor joints without any glue and any nails. Usually, the four people are less than three hours. Can complete the paving or lifting of the site;

4, non-slip moisture: kindergarten and indoor tennis court interlocking mat because the main component is polypropylene, and water has no affinity, so it is naturally not afraid of water, as long as it is not soaked for a long time will not be damaged, and will not attack due to high humidity change. Non-slip, moisture-proof, no deformation when exposed to water.

5, anti-static: kindergarten assembled floor can also block the static electricity brought by the human body, let you stay away from the danger of static electricity.

6. Simple maintenance: the suspension assembly type plastic floor is usually maintained by water washing or cleaning with a clean 90% dry mop. The stained ink, food, greasy on the floor should be wiped off immediately, then diluted with dilution. Scrub marks.

How important is the choice of environmentally friendly floor materials in kindergartens, SC-ZSfloor suspended assembled floor to meet all your needs, choose SC-ZSfloor sports floor materials to give you peace of mind!
What are the advantages of outdoor suspension assembling floor construction paving method?

Some other outdoor floor materials, such as ceramic tiles and PVC plastic flooring, often communicate with customers in daily communication. The construction costs are high, and the cost is increased invisibly. Compared with other materials, the floating floor is paved. In terms of advantages, the advantages have emerged. As a manufacturer of suspended assembly flooring, SC-ZSfloor teaches some applicable paving methods, which are what we do every day. Under the premise that the quality and price of the products reach the customer’s satisfaction, It is possible to save money, so what are the advantages of outdoor paving and floating assembly floor construction?

When the suspension assembling sports floor is laid, there is no need to nail, no glue, and the ground core force is placed on the ground and pressed against the ground line. The suspended floor is detachable, mountable, moveable, and replaceable. This is a brand new construction method.

The interlock commercial basketball court surface is laid fast and the maintenance is simple: when the pavement is installed, the joints are connected by the male buckle. In order to make the adjacent two floor blocks compact after assembly, the rubber seam can be used to knock the floor joint during construction. Glue and any nails (Glue usually contains volatile odors, is not environmentally friendly, and it takes time to gel and it takes good weather). The entire site is connected by paving splicing, and it is usually less than three hours for four people to complete the paving or disassembly.

After the paving, the maintenance required during use is also very simple, just rinse with water, use mop cleaning indoors, maintenance is very low; this is in line with the simple and simple theme advocated by people today. The suspended assembled floor does not require high maintenance costs in the later period, and the usage rate is high: due to its good moving performance, it can be repeatedly disassembled for shipment and can be directly disassembled and moved to another field. Convenient and practical. The above advantages are also unique to suspended flooring. Ok, the content is shared here. Welcome friends to collect attention, if you feel good, you can share with friends.

Suspended assembled plastic floor will breathe the sports floor

The raw material used in SC-ZSfloor elastic interlocking multi-use basketball court is polypropylene, non-toxic, odorless, low density, high in strength, rigidity, hardness and heat resistance. It can be applied at around 100 °C. It has good dielectric properties and high-frequency insulation and is not affected by humidity, but becomes brittle at low temperature, not wear-resistant and easy to age. Suitable for manufacturing some common machine parts, high temperature parts and insulation parts. It can be used for modified utensils in utensils, tableware and suspended floors. It is added with toughening, anti-aging and anti-oxidation additives to improve the shortage of raw materials.
Polypropylene PP has many excellent properties:

The relative density is only 0.89-0.91, which is one of the lightest types in plastics.

2, excellent mechanical properties, in addition to pressure and impact resistance, other mechanical properties are better than polyethylene, molding processing performance is good.

3, has a high heat resistance, the application temperature after modification can reach 110-120 °C.

4, good chemical properties, no water absorption, and will not react with most chemicals.

5, the texture is pure, non-toxic.

6, electrical insulation is good.

7. The transparency of polypropylene is better than that of high-density polyethylene, and the gas permeability is good.

SC-ZSfloor suspension-assembled sports flooring is dedicated to fighting green sports venues. The goal is to not follow the inferior quality! Only a quality leader! SC-ZSfloor adopts imported brand color masterbatch into the indoor tennis court interlocking mat. The color is rich. People say that each color represents a mood, red represents struggle, green represents health, orange represents happiness, white represents tranquility and leisure, etc. Scientific experiments, the facts are also true, because our nerves are highly sensitive to color, colors can easily stimulate our receptors, and the nervous system naturally adjusts the various parts of the body for us, thus changing our mood. The suspended plastic floor is colorful, and choosing a good color or matching will keep us in a good mood!
Floor testing before sports floor construction

Sports flooring is a new type of lightweight body decoration material that is very popular in the world today, also known as „light body material.“ It is a popular product of Japan and South Korea in Europe, America and Asia. It has been popular in the international market since the early 1980s. It has been widely recognized in China’s large and medium-sized cities and is widely used. Today SC-ZSfloor introduces you to the floor test to be done before the construction of the sports floor.

1. Use temperature and humidity meter to detect temperature and humidity. Indoor temperature and surface temperature should be 15 °C, and should not be applied below 5 °C and above 30 °C. The relative air humidity suitable for construction should be between 20% and 75%.

2. The moisture content of the base layer is measured using a moisture content tester, and the moisture content of the base layer should be less than 3%.

3. The strength of the base layer should not be lower than the requirement of concrete strength C-20, otherwise suitable self-leveling should be used to strengthen the strength.

4. The test result with the hardness tester should be that the surface hardness of the base layer is not less than 1.2 MPa.

5. For the construction of interlock commercial basketball court surface materials, the unevenness of the base layer should be less than 2 mm in the range of 2 m ruler. Otherwise, the self-leveling should be used for leveling.

PVC floor to ground base requirements and installation steps

The effect of thermal expansion and contraction on the floor after the completion of PVC floor construction

The PVC floor is divided into two types: a coiled floor and a sheet floor. The PVC sports assembled floor is a coiled floor. The so-called coiled floor is a soft roll of a roll, usually having a width of 1.42 meters. 1.5 meters, 1.8 meters, each roll length of 15 meters, 20 meters, etc. (length can be cut at will), the total thickness can reach 3.5mm-9.0mm.

PVC flooring can be divided into: lychee pattern, jewel pattern, cowhide pattern, sand pattern, crystal sand, cloth pattern, wood grain and so on. PVC flooring is a new type of floor decoration material, which has been widely used in various high-end sports venues in recent years. indoor tennis court interlocking mat has many advantages. Today we mainly introduce the thermal expansion and contraction performance of the assembled floor.

The thermal expansion and contraction coefficient of PVC sports flooring is 2‰-3‰. This kind of expansion and contraction value will not cause the floor and the ground to vacate in the up and down direction; in the left and right direction, the joints of the two sports PVC floors are not Tightly fit together, but there is a certain gap to ensure the expansion and contraction of every two floors; plus the expansion and contraction area reserved around the site, enough to ensure the use of the entire site.

On the one hand, the PVC floor has a good shock absorption and cushioning effect, on the other hand, the movement power is evenly dispersed in all directions. In this way, if there are occasional small pits on the site, no matter where the pit is, it will not affect the balance of the interlock commercial basketball court surface. If it is a very obvious pit, drum, it must be handled before construction.

In addition to the above, the anti-slip design of PVC sports flooring is also a factor to ensure that it is not easily deformed. It has a soft double cross-slip strip, which is non-slip and can transmit strong movement power as you like, preventing sports injuries such as sprains and bruises.

Moreover, the surface of the PVC floor is matte-treated, which is consistent with the brightness of the light. It does not absorb light and reflects glare, which can better protect the eyes and is not prone to fatigue.
Indoor and outdoor sports venue PVC plastic floor daily maintenance strategy

PVC plastic sports flooring can be divided into two types according to its shape: sheet metal and coil material. The plastic sports assembling floor used in sports venues is generally sheet. Before construction, it is necessary to ensure that the ground is flat. If it is already tiled, then Sheets can be laid directly on the tiles. If it is an uneven ground, it is generally necessary to play the self-leveling cement. The construction process should keep the floor clean and dry.

Immediately after the PVC plastic floor is finished, wipe the surface of the sheet with a damp cloth, especially at the seams, to prevent glue from overflowing. Also, 12 hours after the floor is laid, the glue is basically qualitative. At this moment, the mop can be carefully cleaned again. After the ground is dry, the water-based glue is continuously glued three times. The corner part should focus on the glue, and the glue can make the floor. The wear resistance is increased, the life is effectively improved, and the water can be prevented from penetrating into the glue layer under the floor to prevent the glue from falling off.

Precautions during the use of PVC sports flooring: timely removal of all kinds of dirt on the surface of interlock double tier sport flooring, it is absolutely forbidden to soak the assembled floor in clear water, although some grounds use waterproof glue to cut off water sources (such as floor drains, water rooms, etc.). However, long-term soaking by water will seriously affect the service life of PVC plastic sports flooring. In the cleaning process, the sewage will be drained by a water suction machine.

Floors paved with more people and more wear should shorten the maintenance period and increase the number of waxing of high-strength wax. It is best to glue once every six months. It is absolutely forbidden to use hard, rough cleaning utensils (such as steel balls, scouring pads, etc.) to prevent sharp objects from colliding with the pvc floor.

What are the common characteristics and requirements of kindergarten interior decoration design?

What are the common requirements for kindergartens in interior design and renovation? The following kindergarten ground material design company will explain to you.
1. Renovation materials with durability and long service life should be used;
2. The decoration materials should have flame retardant and fireproof properties, and avoid using flammable materials;
3. The decoration materials used must conform to the standards set by the relevant state departments, non-toxic, no radiation, and no harmful gases are released;
4. The decoration materials used should be easy to install, construct, produce and update;
5. The decoration materials used should have the properties of heat insulation, cold protection, sound insulation and sound absorption;
6. Kindergarten design should be aesthetically pleasing, economical and meet the characteristics of preschool.
7. Indoor and outdoor floor materials should be made of environmentally friendly materials, non-toxic, odorless, waterproof, moisture-resistant, non-parasitic, environmentally friendly, safe and hygienic;
The above is the common requirement for kindergarten interior design and decoration introduced by sc-zsfloor Xiaobian of kindergarten floor. Sc-zsfloor company is specialized in providing indoor and outdoor ground design and interlock double tier sport flooring for kindergartens (plastic floor/assembled floor/PVC plastic floor glue) The company that decorates and designs, gathers excellent kindergarten ground designers to provide high-end kindergarten design and decoration services. Spend more energy on designing and decorating materials to study the effects of color and environment on children.
What should be met in the outdoor event venue when the kindergarten is designed?
Kindergarten design should be set up for outdoor activities venues to meet the requirements of nurseries, kindergartens should be set up outdoor activities venues, what requirements should be met? Here is a small series of kindergarten ground design for everyone to introduce
1 Each class should have a dedicated outdoor activity site, the area should not be less than 60m2, and separation measures should be taken between the activities of each class;
2 There should be a shared activity venue for the whole park, and the per capita area should not be less than 2m2; (the original specification does not stipulate)
3 The ground should be smooth, non-slip, barrier-free, no sharp protrusions, and should be soft or plastic with plastic material; such as floating interlock commercial basketball court surface or PVC cartoon sports rubber.
4 The shared event venue should be equipped with game equipment, bunker, 30m runway, sink, etc. It is advisable to set up a paddling pool with a water storage depth of no more than 0.30m; plastic soft floor materials should be placed under and around the game equipment for paving;
5 Outdoor activity venues should have more than 1/2 of the area outside the standard building sunshine shadow
The green rate in the nursery and kindergarten design sites should not be less than 30%. It is advisable to set up centralized greening land. Plants that are toxic, barbed, fly-flying, pests and diseases, and irritating plants should not be planted in the green space.
The above is the indoor tennis court interlocking mat design for everyone to share the kindergarten design should be set up outdoor activities venue specifications, sc-zsfloor is specialized in providing indoor and outdoor design of kindergarten and ground materials (plastic floor / assembled floor / PVC floor glue) decoration design company, A group of excellent kindergarten ground designers provide high-end kindergarten design and decoration services.

Suitable sports floor

The wear layer of the sports floor (composite type) can not completely determine the wear resistance of the floor. The thickness of the wear layer of the removable interlock synthesis elastic double tier sport flooring is generally between 0.1mm and 0.7mm, and there are also a few thicknesses of 1.0-1.2mm. . The floor of different manufacturers, the wear layer is different in thickness, the wear resistance of the floor is also different, the same is 0.4mm thick wear layer, some floor wear resistance is 3000 rpm, and some have 6000 rpm; A sports floor with a thin wear-resistant layer is more wear-resistant than a floor with a thick wear-resistant layer. This is mainly determined by different manufacturers and the quality of the wear layer. It can only be said that the abrasion resistance of the floor with high wear-resisting layer will be good, but it is not absolute. It is recommended that customers should ask the floor dealer for the quality inspection report of the floor when purchasing the sports floor to see the test results. You can also use 80-mesh sandpaper to lightly press back and forth on the floor samples provided by the seller. One round-trip is a turn to see how many turns the floor can receive to expose the base layer. The result of the test should be tested with the test report. small differences. If the printed layer of the floor is less than 1000 rpm, it will be destroyed, indicating that the commercial prefabricated interlocking running track does not have 1500 turns, which is the unqualified floor.
The sports floor is made of PVC material. PVC is PVC, which is plastic. Plastic is formaldehyde-free. Because PVC composite floor is multi-layer structure, the bonding of the floor requires certain processing technology and technology. Immature manufacturers use glue to bond, so the sports floor contains harmful gases such as formaldehyde. Therefore, when buying sports flooring, don’t forget to smell the floor with a pungent smell. Under normal circumstances, PVC coil flooring will have a slight smell, and the processing technology is better. The smell of sports flooring is almost inaudible, even if There is no stimulation of the respiratory system. The floor produced by many domestic PVC coil flooring manufacturers can not be dispersed after several months of laying.
The fireproof rating of sports flooring is Bf1. Any floor below Bf1 cannot be used in public places (hospitals, office buildings, schools, stadiums, scientific research institutions, social structures, cars, etc.) The fire rating of the material is strictly classified. The indoor tennis court interlocking mat is mainly divided into 7 grades: A1fl, A2 fl, B fl, C fl, D fl, E fl and F fl. The fireproof rating of the sports floor is Bf1.
The color of the sports floor is rich, because the color of the sports floor is printed, so regardless of the manufacturer, the floor produced, even a model of the floor, the floor of different production batches have color difference, a production batch The color of the floor should be similar. If the gap is large, the floor manufacturer is not under strict management or the floor color difference processing technology is still immature.