Preparation for suspension assembled floor installation

Base treatment: The first step in paving a suspended assembled floor is the base treatment. The basic treatment is mainly carried out on the five major problems of “sand, tide, concave, convex and crack” on the ground. The problem ground is repaired to form a new base layer, avoiding the elastic double tier sport flooring arching caused by the original base layer hollowing and cracking.

Leveling the ground: After doing the basics, you need to level the ground. If the ground is not flat, not only will the skirting line have a gap, the overall floor will be uneven, and there will be abnormal noise, which will seriously affect the quality of the floor.

The self-leveling leveling construction is a relatively advanced ground construction technology on the market, which can ensure that the height difference of the original ground is no more than 3 mm per square meter. Self-leveling can make the ground more flat and ensure the quietness of the floor. At the same time, it will make the ground stronger, avoid arching under the floor, and ensure that there is no air barrier between the ground and the floor, which increases the thermal conductivity of the ground.

In the installation of elastic double tier sport flooring tennis court, workers mix a variety of materials with water into a liquid substance. After pouring it into the ground, the liquid substance can flow according to the level of the ground, and automatically level the ground. Quick drying, the cured ground will form a smooth, flat, seamless new base.

Sc-zsfloor sports flooring manufacturers Tips: If you are doing general cement leveling, be sure to leave time for the cement to fully dry. Suspended modular flooring cannot be installed when there is moisture on the ground. There is a simple method for measuring moisture. It is covered with a plastic film of 60 cm square on the ground and sealed around. After 24 hours, there is no gas in the film. If there is moisture in the film, it cannot be installed. In addition, if the height difference of the ground per square meter exceeds 5 mm, it cannot be installed.
Why can environmentally-friendly assembled floors meet the high requirements of kindergartens?

Do you know which floor is used in each kindergarten now? Why can this kind of floor win the trust of teachers and parents, and the sc-zsfloor sports floor manufacturers are loved by children? Today sc-zsfloor assembled floor manufacturers to analyze the reasons for everyone.

The assembled floor itself has the natural characteristics of not easily growing bacteria. After antibacterial treatment and surface PUR anti-pollution treatment, a fungicide, such as iodine, is added to it to enhance the bactericidal effect and anti-pollution effect, and various microorganisms are difficult to Surface growth, such as mold, white Candida, algae, mucor, etc., meet the high requirements for antibacterial requirements in public places such as hospitals and kindergartens.

Under the partial pressure, the elastic interlocking multi-use basketball court will produce instantaneous elastic deformation and increase the friction coefficient of the floor, and it is not easy to slip when walking. The surface of the hard ground material is hard and smooth, and its friction coefficient u is only 1/3 of that of PVC, and it is easier to slip when walking. The assembled floor has anti-noise effect, and when the person and the cart pass, the noise can be reduced by 10-15 decibels compared to the hard ground under the same conditions. The assembled floor feels close to the carpet and is quite comfortable; while walking on the hard ground, the foot feels poor, and it is easy to walk for a long time and hurt the foot bones.

Schreibe einen Kommentar

Deine E-Mail-Adresse wird nicht veröffentlicht.