Impact Construction Waste equipment installation test. 1. The equipment should be installed on a horizontal concrete foundation and fixed with anchor bolts. When installing, pay attention to the vertical of the main body and the horizontal. After installation, check whether the bolts in each part are loose and whether the main door is tight. If so, tighten it. Configure the power cord and control switch according to the power of the device. After the inspection is completed, an empty load test is performed. Production can be carried out after the test is normal.
Impact Construction Waste Machine operating procedures. 1. Before starting the machine, check whether the door of the machine body is closed tightly. Do not open the door during the operation of the machine to prevent danger. 2. The counter-attack construction waste crusher must be started with no load, and it can be produced after it is operating normally. 3. The particle size of the feed must be in accordance with the requirements, and excessive equipment damage and low output will occur. 4. If abnormal phenomena are found in the process of crushing, that is, parking inspections, troubleshooting, and production. 5. Regularly add lubricating oil to the rotating bearing parts.
This series of impact crusher is a generation of impact crusher developed by our company in absorbing domestic and foreign advanced technology, combined with the specific industrial and mining conditions of domestic gravel industry. It adopts manufacturing technology, unique structural design, finished product is cube, no tension and cracks, grain shape is quite good, can break all kinds of coarse, medium and fine materials with feed size not exceeding 500mm and compressive strength not exceeding 350MPa. (Granite, limestone, concrete, etc.) are widely used in a variety of ore crushing, railway, highway, energy, cement, chemical, construction and other industries. The particle size of the discharge can be adjusted, and the crushing specifications are diversified.