How to deal with stone seams

Shearing and seaming are a common process encountered in stone installation and grinding renovation. Stone cutting generally requires professional machines and cutting blades. One machine leaves the factory from the time of entering the factory to the end of the mission. It is mostly its operators, the operator is like the guardian of the 12 inches cut off wheel machine, knowing the performance and status of the machine: how long it takes to run, what kind of sound will be emitted when performing an action, how long it will work How high the temperature will be reached and so on. These things seem normal, but they are the first-hand information of the machine tool, which will be very beneficial to the later maintenance and maintenance of the equipment.
How to deal with stone seams when cutting stone with cutting blades? It should be known that the seam processing is not good and it is easy to cause damage to the stone during later use. First of all, we must first determine the width of the stone to be cut, choose the appropriate cutting piece, and then confirm the thickness of the stone to adjust the height of the cutting piece; then use the wooden line to pull the line, the cutting machine cuts the stone seam cis, if the cutting surface has a zigzag Trace, please change the new cutting piece immediately, and finally use the vacuum cleaner to clean the dust and remove dust. After waiting for about half an hour, you can fill the seam with the adjusted stone sealant. The seam treatment of the cut piece is the seam treatment and seamless treatment that people often say.
1, tools, materials
Power cable reel, portable cutting machine, gold steel cutting blade, small vacuum cleaner, putty knife, towel, bucket, two wooden lines.
2, construction method
1> First determine the width of the stone to be cut, choose the appropriate cutting piece, and then confirm the thickness of the stone to adjust the level of the cutting piece.
2> Then draw the line with the wooden line, the cutting machine cuts the stone seam cis, if the cutting surface has jagged scratches, please change the new cutting piece immediately.
3> Finally, use a vacuum cleaner to suck the waste, and then use a semi-wet towel to remove the dust. (If it is not dusted, it will affect the adhesion of the marble glue, or even fall off) Wait for about half an hour.
4> Fill the seam with the adjusted stone sealant:
Following strict construction procedures, the stone can be evenly leveled when installed or refurbished, with good results:

Hinterlasse eine Antwort

Deine E-Mail-Adresse wird nicht veröffentlicht.

Du kannst folgende HTML-Tags benutzen: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>