Alle Artikel von fujielevators

Über fujielevators

If you are interested in the elevator/elevator and want to know the elevator/elevator, please follow me.

How Elevator Manufacturer Design Elevator Counterweights

In practice, the elevator works in a slightly different way than a simple hoist. The weight of the elevator car is approximately the same as the weight of the car when it is half full (in other words, the weight of the car itself plus 40-50% of the total weight it can carry). When the elevator rises, the counterweight drops. Elevator Manufacturer need to pay attention to the best weight of the elevator.

Elevators that use cables and wheels are sometimes referred to as traction elevators because they involve trailers and counterweight motors. However, not all elevators work like this. In small buildings, hydraulic cylinders (similar to fluid-filled pistons for construction machinery such as bulldozers and cranes) are often used to find hydraulic lifts for lift trucks. Hydraulic lifts are mechanically simple, so they are cheaper to install, but because they usually do not use counterweights, they consume more power and reduce the car’s power. Sometimes the hydraulic cylinder is mounted directly under the car and pushed up and down (a type called direct acting design). Alternatively, if there is no space, the slider can be mounted on one side of the elevator shaft using a rope and pulley system (in a design called indirect action) to operate the car.

The balance makes it easier for the engine to lift the car – it’s easier to lift someone’s weight than sitting on the arm as if sitting at the stern. Due to the counterweight, the motor needs less force to move the car up and down. Assuming that the weight of the car and its contents exceed the weight, all motors must increase the weight difference between the two and provide some additional force to overcome the friction in the pulley. Due to the small force involved, the strain on the cable is small, making the elevator safer.

Today, elevators are supported by multiple cables, each of which is strong enough to carry more than the weight of a fully loaded car. Only when the elevator car is firmly fixed in place, the outer door that can be opened makes it almost impossible to fall off the shaft. The governor works with other equipment to drive the car safely to its destination.

Elevator Manufacturers Call for Attention to Elevator Maintenance

More and more buildings are equipped with elevators, which is a very convenient transportation device. Except for elevator technicians, few people think of the mechanical structure of the elevator until it fails. How to keep the elevator in top condition? The Elevator Manufacturers can give you some advice.

Maintenance of the elevator is a must, and approved aliment of the elevator can extend the activity of the elevator. Routine aliment of the elevator have to be abiding with the architect or a acclaimed company. Please chase the adjustment instructions beneath to ensure that the elevator is operating effectively:

Keep the temperature about the elevator at a nominal level. The accepted operating temperature is 15 to 32 degrees Celsius. Check the elevator for automated or concrete accident every day. Always accrue the breadth about the elevator apple-pie and abolish any bits that could baffle with the elevator’s operation. In the continued run, even a baby bulk of dust and dust will accumulate.

Maintenance is mainly disconnected into the afterward types:

Routine maintenance: Includes all user interface aspects of the elevator, such as alarm buttons, displays, elevator leveling, walkie-talkie, ARD. Lights, aperture operations, etc.

Preventive maintenance: Some locations of the elevator, such as machines, ropes, bearings, car guides, adviser rails, etc., accomplish antitoxin aliment at the defined frequency.

Troubleshooting: Adjustment or alter specific locations to restart the elevator in the accident of a failure.

Several Important Factors in Choosing an Elevator

When you decide to install a residential elevator, you must study various types of markets. There are several types of residential elevators on the market, and making the final choice can be a daunting task. Although not the cheapest alternative, it is important to consider. The Elevator Manufacturer gives you the factors to consider when choosing an elevator.

Elevators are a acceptable best for families that do not accommodated all the requirements of a residential elevator. There are three capital types of elevators to consider:

The next agency to accede is the accustomed accommodation of the elevator. It includes commuter weight, items or wheelchairs. The hydraulic elevator has a top amount accustomed capacity. Pneumatic accessories can alone backpack 450 pounds.

Vertical belvedere lifts are accessible in a array of shapes and sizes. These lifts can accomplish at a best acme of 96 inches and charge to be installed on a abiding foundation such as accurate slabs. It is important to ensure that these lifts are cautiously bankrupt to anticipate causeless accession of rain and snow, as able-bodied as to anticipate avalanche or added hazards.

residential elevator

The next aspect is the centralized ambit of the cab. You may ambition to install an elevator in your apartment, in which case anyone may ambition to carriage a wheelchair, scooter, etc. In this case, it is best to accept hydraulic because it has a added interior.Hydraulics involves a abundant accession procedure. Accession of pistons and cylinders requires excavation. It is all-important to absolutely change the amplitude of your home.

Proper Use of the Elevator can Protect You

Elevator Manufacturer are improving elevators.At present, the manned elevator is an intelligent automation device controlled by a microcomputer. It does not require special personnel to operate the drive. According to the following procedure, only ordinary passengers can take the elevator and operate the elevator.

1 dial telephone booth (or telephone booth): set on the floor of the elevator entrance floor, generally there are two arrow buttons for passengers to call the car use floor.

2 car steering wheel: installed on the inner wall of the car, each floor has a number button, and a switch button and emergency call button, mainly used to enter the elevator floor using a dedicated elevator.

3 Escalator: A transport device with a circular operation for transporting passengers to tilt up or down. It is like a moving staircase and a moving belt.

4 Automatic walkways: Circular passages, such as escalators, are about acclimated for burden agitated by cartage and cartage with a accumbent or absorbed bend of no added than 12 degrees.

5 Obey the assurance precautions and admonishing signs of the elevator;

6 is not adumbrated in the accustomed accompaniment of the elevator;

7 accessible the elevator aperture in a non-secure manner;

8 locations of the elevator and its accessory facilities, amuse do not detach or detach the elevator;

9 does not beat the rated amount of the elevator, the supply of the appurtenances shall not be overloaded;

10 Other behaviors that endanger the safe operation of the elevator or endanger the assurance of others.

Elevator Manufacturer Believe that Elevator Maintenance is a Must

As a freeholder or manager, you accept to actuate how generally the elevator needs aliment and align the elevator in the contract. Avoid application agreement such as “system,” “regular,” “regular,” or “as needed.” The Elevator Manufacturer reminds you that some accessories requires account maintenance. Please ensure that your arrangement provides account maintenance, if not, it applies.

In accession to accustomed precautions, the cloudburst needs added care:

It is actual important to waterproof the elevator pit. Check the action of the pit afore the monsoon.

Properly attention the apparatus allowance is all-important to ensure that doors, windows or any added aperture cuts do not access the water.

Make abiding there is no baptize on the stairs on the stairs as it will access the able-bodied from the top.

If there is baptize in your elevator pit, you accept to about-face off your accommodation elevator because the active cable may backpack water, which may aftereffect in alarming operation.

The sensitive components you need to be aware of are:

main controller.

ARD controller.

battery.

Variable frequency drive.

Door motor controller.

Intercom.

Landing and car button.

Elevator Manufacturer: four Different Elevator Technologies

Typically, Elevator Manufacturer can use a array of elevator technologies, four of which are declared below. they are:

Hydraulic Elevator – This is the old standby blazon that has been about for abounding years and is accustomed to a lot of of us. They run smoothly, are mechanically actual reliable, and are time-tested. One abeyant disadvantage of this blazon of elevator is that it requires a abstracted accessories allowance to board the ammunition catchbasin and associated components. This blazon of elevator is about advised to be the best all-round advantage if because all factors.

Counterweight Elevator – Equipped with a abundant lift, aswell accepted as an elevator, operated by a balance that suspends the elevator car in the shaft. This blazon of residential elevator uses hydraulics and accordingly does not crave oil or associated baptize tanks. Since the elevator car is abeyant from above, it is advised to be beneath safe in earthquake-prone areas.

Overhead Elevator – This blazon of elevator uses a abeyant car that is installed in the roof anatomy and accordingly does not crave an accessories room.

Pneumatic lifts – sometimes referred to as exhaustion lifts, this blazon of lift relies on air burden to move the car. It usually does not crave a abstracted computer allowance to board any equipment. However, they are noisy… and they are usually bound in the endless they can carry. Elevators of this blazon are about cheaper than hydraulic elevators.

QQtupian20_02-4

Different elevators accept altered characteristics. If allotment an elevator, you accept to accede a lot of factors. You charge to accept your elevator according to your architecture characteristics.

Escalator Company can Improve Existing Elevators

All Escalator Company offer various packages to meet customers’ needs. For society, it is important to determine the purpose of modernization and make the right choice.

You may need to replace some components of elevators instead of overhauling or replacing elevators. If technical obsolescence is to be solved, replacing the controller fixture and wiring is sufficient, because the mechanical life replaces the motor, and the controller fixture and wiring will work. The purpose of cabin modification and boarding gate replacement is only to look and feel.

Key considerations for modernization

Set clear goals for modernization

Some modernizations, such as speeding up, stopping time, and making elevator VVVFs may require PWD certification, which requires a certain amount of paper work, so be sure to consider what you are talking about with the elevator company.

Modernization also requires shutting down the running elevator, and the definition of this period is important when the contract is completed.

It is best to keep civil works at a minimum so as to reduce the impact of downtime.

If you choose an elevator company that is different from the original manufacturing/maintenance company, make sure that the company provides the necessary spare parts support for the original parts. Clarify who will be responsible for maintaining the transition period, as the outgoing party may not be interested and may not have the necessary spare parts to maintain it until modern competition.

Avoid monsoon as a modern season, because the threat of water storage materials is enormous.

Noise can be a problem in the modernization process, making residents aware of and prepared for some inconveniences, otherwise the elevator company will have difficulty meeting the timetable.

It is a good practice to keep the shaft inside and replace the main power supply and lighting cable in the process of modernization. But make decisions based on actual site conditions.

Elevator Supplier: How to Face Elevator Accidents

Elevator Supplier continues to teach you some ways to deal with elevator accidents.

After a little bit of stability, what you have to do is roll up the carpet that is laid on the elevator car floor and expose the bottom vents for the best ventilation. Then shouted loudly outside, in order to attract the attention of passing pedestrians.

If you are shouting dry and still no one is coming to rescue, you have to save for a way to save your energy. At this time, you may wish to intermittently pat the elevator door, or hit the elevator door with a hard sole, waiting for the arrival of rescuers. If you hear a sound outside, shoot again. During the period when the rescuers have not yet arrived, they should calmly observe, wait patiently, and don’t mess around.

Some people who are in a hurry will try to open the elevator from inside. This is a self-help method that firefighters strongly resist. Because the elevator is in the event of a fault, the loop of the door sometimes fails, and the elevator may start abnormally. If you force your voice, it is very dangerous and it is easy to cause personal injury. In addition, because the trapped people do not understand the floor position where the elevator is out of service, blindly open the elevator door, there is also the danger of falling into the elevator shaft.

In case of a sudden fall of the elevator, please close your back to the elevator, then bend your knees and your feet to the outside site. This will maximize the cushioning and avoid excessive impact on people. In addition, do not blindly climb out from the skylight. If the car door cannot be opened temporarily, it should be assisted by professional rescue personnel. After the power failure, it can escape from the skylight.

In short, in the case of being trapped in an elevator, it is the best way to successfully get out of trouble by properly controlling emotions, scientifically distributing physical strength, and patiently waiting for rescue. Fuji elevator introduces the knowledge of elevator escape and we hope you can use elevator safely.

Elevator Supplier are Constantly Improving Elevator Technology

Demand for skyscrapers and arty barrio in third-tier Chinese cities is traveling into overdrive. This means that high-speed elevators are also in great demand in China, the world’s largest Elevator Supplier. The application of contactless elevators will be convenient for many people.

The “touchless basal button” arrangement works if sensors aces up basal movement abreast the elevator’s aperture and amendment the lift to the specific attic after the charge to advance a button with one’s fingers. This can be acceptable for humans accustomed ample endless in their hands.

Beside such atypical features, the lift can be set up even in a architecture with the smallest-size elevator shaft in the country and alone requires 110-centimeter-deep pit at the basal of the shaft.

Besides abbreviation ability consumption, lighter ropes accomplish braking a car easier should something go wrong.

Carbon fibre resonates at a altered abundance to added architecture materials, which agency it sways beneath as skyscrapers move in top winds—which is what alpine barrio are advised to do.

MRL combines the no nonsense functionality of hydraulics and a absolutely apparatus room-less design- absolute for low-rise buildings. It allows for the access of architecture amplitude while befitting architecture allocation and costs low. Few affective locations and an apprehensible architecture accommodate dependable, able accessories that isn’t over engineered for barrio with just a few floors. And, the amount to advance the Fuji MRL is lower than the amount of advancement added circuitous low-rise MRL absorption elevators.

The elevator will affection technologies that abutment safe and adequate elevator operation, in accession to the drive and ascendancy technologies bare to attain the world’s fastest speed. Through these technologies, Fuji will ensure that the elevator will accommodate cartage with a adequate ride even if operated at top speeds.

Besides authoritative the lift shaft added compact, Hyundai Elevator congenital an LCD acute indicator console to accord users a clearer basal advice on the elevator’s movement. It can be installed with closed-circuit TV cameras and comes with clean-air filters, as able-bodied as accelerated insect repellents to accumulate out mosquitoes and flies.

Elevator Supplier Promote Innovation in Elevator Technology

As we all know, the development of technology brings us lots of convince, Elevator Supplier Fuji know the importance of technology, and Fuji elevator uses advanced technology in elevator production.

In the machine room-less elevator, the traction machine and the control cabinet are placed in the hoistway, eliminating the need for a separate machine room, saving construction costs, increasing the effective area of the building, and improving the design freedom of the building’s architectural aesthetics. The characteristics of the AC permanent magnet synchronous gearless traction machine are: (1) the structure is simple and compact, the volume is small, the weight is light, the shape can be flexible and diverse; (2) with variable frequency control can achieve greater energy saving; (3) No gears, so there is no gear vibration and noise, gear efficiency, gear wear and oil lubrication problems, reducing maintenance work and reducing oil pollution; (4) the motor is rotating in the power generation braking state due to power loss, increasing the traction The safety and reliability of the system.

Elevator remote monitoring system. The system transmits the elevator operation and fault information obtained by the signal processing computer in the control cabinet through a public telephone network or a private network (all need to use a modem) to a remote professional elevator service center computer capable of providing a visual interface, so that there The service personnel master the operation of the elevator, especially the fault situation. The system generally has functions such as display failure, analysis failure, fault statistics and prediction, and other remote debugging and operation, which is convenient for maintenance personnel to quickly perform maintenance response and take maintenance measures. This shortens the troubleshooting time, simplifies the labor of manual fault checking, and ensures that the elevator of the building runs safely and efficiently.

In the future, Fuji will continue to explore new technologies in the industry.